搜索

请检查您的链接是否正确或联系我司人员 回到前宏主页

产品详情 全部 通信 终端和服务器 终端和服务器 人脸识别测温一体机MJ30-2T07 人脸识别一体机 ​ 主要卖点 ●活体检测：有效防范照片、视频、模型等攻击行为； ●口罩检测：口罩识别准确率85%，满足常规口罩检测要求，支持口罩佩戴提示，同时可关联门禁控制； ±0.3℃；最佳检测距离0.4米；支持体温异常报警（阀值可设）； ●IC卡核验：支持识别IC卡，NFC卡等； ●健康码核验：红/黄码报警，绿码通行； ●语音播报：支持健康码验证结果、核酸检测结果和时间播报、体温验证结果播报，以及口罩佩戴提示播报。 各项主要参数指标 产品关键参数 点击下载产品手册 相关产品

产品详情 全部 通信 终端和服务器 Telecommunication Fiber optic cable termination box Sheet Metal Fiber optic terminal box is the final connector of a fiber optic cable, one end of which is the fiber optic cable and the other end is the pigtail, which is equivalent to the equipment that splits a fiber optic cable into a single fiber, its function is to provide fiber to fiber fusion, fiber to pigtail fusion and optical connector handover. It also provides mechanical protection and environmental protection for optical fiber and its components, and allows proper inspection to maintain the highest standard of fiber management, which can be further divided into wall-mounted fiber optic terminal box, rack-mounted fiber optic terminal box, indoor and outdoor fiber optic terminal box two types. Product Benefits Wall-mounted optical cable terminal box (1) Wall-mounted fiber optic terminal box is used for fiber optic cable introduction, fixed and protection, fiber optic cable terminal and pigtail fusion fiber fusion distribution unit body, the maximum limit of fiber optic cable into the end, contiguous and wiring a high degree of tightening, play the role of pigtail tray storage and protection connector, and can be used as a separate fusion distribution unit and hung on the wall as necessary. (2) The box body is made of high-quality cold-rolled steel plate or galvanized steel plate, and the surface of the box body adopts electrostatic spraying process, which has superior dustproof, anti-corrosion and anti-aging performance and high safety performance; (3) Boxes can be accessed up and down the cable, easy to install and operate; (4) The fusion box is a laminated structure, which can be easily increased or decreased, easy to operate and can be adapted to the fusion of ribbon fiber; (5) The adapter is installed at an inclined angle, and the coiling of the pigtail is naturally smooth and has a large radius of curvature, which minimizes the transmission loss of the fiber; (6) Sufficient impact strength box fixing for easy installation in different use cases (7) Compact and lightweight, with a mechanically designed structure that is reliable in any operation, replacement, storage and transport situation; (8) Suitable for indoor fiber optic cable through splicing and branch splicing, to protect the role of fiber optic splices; (9) Providing space for placement of fiber optic cable terminals and storage of fiber at the remaining ends, facilitating installation operations; (10) Insulate the metal components of the fiber optic cable from the fiber optic cable end shell and allow easy lead-in grounding; (11) You can choose direct pigtail out, or choose a variety of adapters such as SC, FC, LC, ST, etc. Rack mount optical cable terminal box (1) Optical fiber terminal box, referred to as OTB, is the terminal in the laying of fiber optic cable to protect the cable and pigtail fusion box, mainly used for indoor fiber optic cable through splicing and branch splicing and cable terminal fixed, play the role of pigtail tray storage and protection connector. Rack type cable terminal box is installed in the 19-inch cabinet, to meet the 19-inch cabinet installation. (2) Common rack mount terminal box: (3) The box body is made of high-quality cold-rolled steel plate or galvanized steel plate, and the surface of the box body adopts electrostatic spraying process, which has superior dustproof, anti-corrosion and anti-aging performance and high safety performance; (4) Compact and light weight, mechanical design structure is reliable in any operation, replacement, storage and transportation, etc., with internal fiber optic cable fixing device, fusion splice tray, and over wire ring; (5) Sufficient impact strength box fixing for easy installation in different use cases (6) Providing space for placement of fiber optic cable terminals and storage of fiber at the remaining ends, facilitating installation operations; (7) With the function of insulating the metal structure of the fiber optic cable from the terminal box shell and can be easily led out to ground; (8) You can choose direct pigtail out, or choose a variety of adapters such as SC, FC, LC, ST, etc. Pull-out terminal box (1) The box body is made of high-quality cold-rolled steel or galvanized steel, and the surface of the box body adopts electrostatic spraying technology, with beautiful appearance and convenient operation; (2) Suitable for indoor fiber optic cable through splicing and branch splicing, to protect the role of fiber optic splices; (3) A variety of adapters such as SC, FC and LC can be used according to construction needs. Product Type According to the application scenario, it can be divided into wall-mounted optical cable termination box and rack-mounted optical cable termination box. Wall-mounted terminal box Rack-mounted terminal box Pull-out terminal box Product use It is used for wiring connection of fiber optic cable and optical communication equipment. Through the adapter in the terminal box, the optical signal is led out by optical patch cable to realize the optical wiring function. It is suitable for the protective connection of fiber optic cable and wiring pigtail, and also for the fiber optic terminal point in fiber optic access network, and is widely used in integrated cabinet and network cabinet. Product application tools Fiber optic terminal box construction, the need to use to the tools are: fusion fiber machine, alcohol, power meter, anhydrous ethanol, OTDR tester, pigtail, dissecting pliers, fiber cutting knife, oblique pliers, horizontal ruler, impact drill, screwdriver, black tape, soft plastic tape, ring knife, tin pliers, optical power meter, pen red light source, etc. Frequently Asked Questions How is the fiber optic cable termination box connected? (1) outdoor fiber optic access terminal box, the purpose is to fuse the fiber in the fiber optic cable with the pigtail, through the jumper, to lead it out. (2) the fiber optic patch fiber into the fiber optic transceiver, the fiber optic cable signal into electrical signals. (3) the fiber optic transceiver is the electrical signal, the use of transmission media is twisted-pair cable, twisted-pair cable can be accessed at this time network equipment RJ-45 port, so far, it will complete the conversion of the photoelectric signal. Can it be customized? Yes, whether you are a standardized derivative, or non-standard customization, we can meet. 点击下载产品手册 相关产品 1/2 Sheet Metal Traditional fiber optic cable transfer box 1/1 Sheet Metal All-in-one fusion tray 1/2 Sheet Metal No-jump fiber optic cable transfer box 1/2 Sheet Metal Expanded capacity fiber optic cable transfer box

请检查您的链接是否正确或联系我司人员 回到前宏主页

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M6AX-96C-I(GP339) Dome Fiber Optic Splice Closure, M 6 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M4AX-AL-12-672C(GP321) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 8-30mm Number of cable entry ports: 2+16 Maximum capacity of fusion fiber tray (core): 12 Maximum number of fusion cores (cores): 672 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and the number of - Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图5.jpg 主图1.jpg 1/5 Dome Fiber Optic Splice Closure, M 6 GJS03-M6AX-48C(GP223)

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M5AX-RS-AL-288C(GP304) Dome Fiber Optic Splice Closure, M 5 The product is suitable for outdoor large-capacity fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environments need to be specified separately in the order. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M4AX-AL-12-672C(GP321) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 8-30mm Number of cable entry ports: 2+16 Maximum capacity of fusion fiber tray (core): 12 Maximum number of fusion cores (cores): 672 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and the number of - Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 Dome Fiber Optic Splice Closure, M 5 M5AX-JX-AL-SC(48)-12~144C(GP304) 主图1.jpg 主图2.jpg 主图6.jpg 主图1.jpg 1/6 Dome Fiber Optic Splice Closure, M 5 M5AX-RS-AL-SC(48) 12~144C(GP220) 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 Dome Fiber Optic Splice Closure, M 5 GJS03-M5AX-JX-AL-288C(GP304)

产品详情 全部 通信 终端和服务器 通信 户外机柜—综合柜 钣金 基站用综合柜是为通信基站及其相关设备提供安装空间并提供不间断电源的专用柜体，可安装通讯集成主设备，通讯传输设备，电源设备，ODF,动环监控以及各种型号的电池等，并提供温控解决方案，具有安全可靠、防盗性能强、噪音低、散热效果好、占用空间小等特点，可帮助客户实现快速选址建站、快速部署，极大提升通信系统平台升级配套的综合服务能力。 产品优点 (1) 小型美观，紧凑收容（小于0.8平米/单元） (2) 模块化设计，具备高可靠性，维护简单，可根据客户差异需求，灵活组合 (3) 支持多场景、多功能应用（楼顶站、街边站、郊区站、运营商共站等） (4) 优质热镀锌板加阻燃性材料制作而成 (5) 良好的保温效果（PU芯材不小于45MM） (6) 户外防水等级IP55 (7) 选点建站成本低 (8) 兼容多种规格电池型号 (9) 支持机柜扩容 (10) 智能温控系统 产品类型 产品用途 (1) 机柜的安装固定功能：可安装固定IT设备、服务器等设备和电池，设备主要固定方式为19英寸机架式安装，固定在U制立柱上，机柜的主框架及U制立柱设计方便安装设备，且承重能力比较强，所以机柜内可安装所有标准设备，电池可支持直放或者19英寸机架式安装 (2) 机柜的理线功能：机柜内部有各种理线槽、理线架、理线板及走线通道等，给机柜内部安装的各种设备提供非常方便的布线管理 (3) 机柜的保护功能：机柜是一个相对封闭的空间，柜门关闭后可以给内部设备起到保护作用防止来自外部的损坏等，比如可以防止老鼠进入机柜里面对设备或线缆进线破坏 (4) 机柜可整合UPS电源、配电、制冷、门禁、机柜、照明、消防、动环监控、应急通风等多个系统，经过监控系统对全部子系统完成统筹管理 (5) 为通讯传输设备全稳定运行提供可靠的温控调节系统 (6) 为通讯传输设备及柜体提供可靠的接地保护系统 产品应用工具 一体化机柜可充分应用于营业网点（电信,金融,能源,广电,零售）小型企业,大型企业,政府,教育,医疗的分支机构和网络间边缘数据中心，使用时需要应用到的工具有：熔纤机，光纤切割刀，光纤测试仪，笔式红光源，光功率计，剖线钳，斜口钳，螺丝刀，需要准备的施工物料有：无水乙醇，胶布，软塑带，防火泥，波纹管等。 常见问题解答 除上述设备尺寸外支持非标产品定制吗? 支持，客户可根据自己的需求提出具体的要求，公司支持非标定制产品，产品内部尺寸可定制，19/21英寸可定制。 一体化机柜综合柜与传统的机柜有何区别吗? 一体化机柜将数据中心基础设备产品深度整合，包含UPS、配电、制冷、机柜、消防等多个子系统，经过监控系统对全部系统完成统筹管理，简化设计和树立流程，可靠的UPS电源配电系统，不时为IT设备保驾护航，同时配置了精密制冷系统，保证IT设备运转正常，搭配动环监控系统实时监控设备工作状态。一体化机柜采用全密封设计，能应用在多种恶劣室内环境中，无需单独设置机房，针对特殊站点可选用综合机柜，设备及电池置于同一柜体中，各设备分别工作，各区单独温控。 一体化机柜优势是什么? (1) 相对于传统机房，一体化机房结构更简单，工厂预验证测试相比现场施工建设更加规范、安全可靠；全密封设计杜绝外界空气尘埃及腐蚀性气体对IT设备的危害；动环监控系统全方位监控基础设施，及时告警异常状况，安全无忧。 (2) 更省时省力建站，产品化的模块化设计让现场一天内即可完成安装交付，相比传统建设模式快2倍以上。 (3) 更小的占地面积，单柜占地面积最小仅0.6m2，封闭式设计，环境适应能力强，不需要装修、地板等配套工程，有效降低建站成本，全封闭式制冷提升整机能效，使总体拥有成本显著下降。 (4) 更好的管理，一站式售后服务能及时处理各类设备故障问题，省时省心；标配动环监控系统，可本地、远程监控管理，更可多网点接入上层管理平台统一监管，多样化选择支持。 (5) 一体化集成设计，一体化机柜整合了UPS电源、配电、制冷、门禁、机柜、照明、消防、动环监控、应急通风等多个系统，通过监控系统对全部子系统实现统筹管理，打造成为一体化产品，简化设计、采购、建设流程。 点击下载产品手册 相关产品 1/24 钣金 绝缘耐压固定装置（金具） 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 钣金 综合机柜 主图1.jpg 主图2.jpg 主图6.jpg 主图1.jpg 1/17 钣金 光缆终端盒 主图1.jpg 主图2.jpg 主图1.jpg 1/2 钣金 移动智慧厕所

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M12AX-18-12C (GP353) The product is suitable for outdoor fiber optic cable splitting fiber splitting fiber into the home project. This product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, wall-mounted and other installations, suitable for use at the end of the fiber optic broadband network access network. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、Silicone rubber seal between the shell and the bottom. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、fiber radius of curvature > 37.5mm, fiber splicing tray additional attenuation ≤ 0.01dB; 4、with fiber into the end and fusion splicing; can take micro optical splitter maximum 1:8. Commonly used tools for construction cross cutter, tape measure. Parameter table Model: GJS03-M10AX-JX-432C(GP318) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-20mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum fusion core (core): 432 (12-core ribbon) Fiber optic residual fiber intake device: Yes Sealing method: Mechanical Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

产品详情 全部 通信 终端和服务器 通信 GJS03-M1AX-A8，SC-24 24-72C-D(GP297) 帽式光缆接头盒, M1 该产品适用于室外光缆架空、管道等直通接续和分歧接续，光缆满足多分歧2进8出光缆端口管理，且具有带有光纤成端和光纤跳接装置。本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈、光缆口利用耐温热缩管密封，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴； 5、体积小巧，在管道或狭小空间更加适用； 6、具备光纤成端和跳接，端口数：最大24芯； 7、多分歧结构设计，具有2进8出多光缆管理； 8、防白蚁、耐酸碱油、抗极寒和高温环境需订货单独说明。 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、压扁：盒内充入40±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2.2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉2000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-40℃~+65℃，内部气压40(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、热风机或喷枪、锯工、卷尺。 参数表 型号GJS03-M1AX-A8，SC-24 24-72C-D(GP297) 盒体材质PP 适应光缆直径椭圆孔：10-25mm；小孔：6-11mm 入缆口数2+8 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：96 光纤余纤收容装置：否 密封方式：机械+热缩密封 光纤成端类型及数量：SC/24 产品使用环境：架空、管道、地埋 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 帽式光缆接头盒, M1 GJS03-M1AX-A8-144C-W30(GP1416) 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 帽式光缆接头盒, M1 GJS03-M1AX-A8-24-96C-N08(GP218) 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 帽式光缆接头盒, M1 GJS03-M1AX-A8-24~96C(GP204) 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 帽式光缆接头盒, M1 GJSO3-M1AX-144C-SRZJ14(GP1444)

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M1AX-A8,SC-24 24-72C-D(GP297) Dome Fiber Optic Splice Closure, M 1 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergent splicing, optical cable to meet the multi-divergent 2 into 8 out of the optical cable port management, and has with fiber into the end and fiber jumping device. The product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、with fiber into the end and patching, the number of ports: maximum 24 cores; 7、multi-divergent structure design with 2-in and 8-out multi-optical cable management; 8、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、 vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8-144C-W30(GP1416) 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8-24-96C-N08(GP218) 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8-24~96C(GP204) 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 Dome Fiber Optic Splice Closure, M 1 GJSO3-M1AX-144C-SRZJ14(GP1444)