搜索

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M10AX-RS-288C-SRZJ-21 Dome Fiber Optic Splice Closure, M 10 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、 termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M9AX-24~144C(GP317) Box material: PP Adapt to the diameter of fiber optic cable oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+6 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图5.jpg 主图1.jpg 1/5 GJS03-M10AX-RS-432C-N14(GP367) Dome Fiber Optic Splice Closure, M 10 主图1.jpg 主图2.jpg 主图5.jpg 主图1.jpg 1/5 GJS03-M10AX-JX-432C(GP318) Dome Fiber Optic Splice Closure, M 10 主图1.jpg 主图2.jpg 主图6.jpg 主图1.jpg 1/6 GJS03-M10AX-JX-24~288C-SRZJ-21 Dome Fiber Optic Splice Closure, M 10

产品详情 全部 通信 终端和服务器 终端和服务器 人脸识别测温一体机MJ30-2T07 人脸识别一体机 ​ 主要卖点 ●活体检测：有效防范照片、视频、模型等攻击行为； ●口罩检测：口罩识别准确率85%，满足常规口罩检测要求，支持口罩佩戴提示，同时可关联门禁控制； ±0.3℃；最佳检测距离0.4米；支持体温异常报警（阀值可设）； ●IC卡核验：支持识别IC卡，NFC卡等； ●健康码核验：红/黄码报警，绿码通行； ●语音播报：支持健康码验证结果、核酸检测结果和时间播报、体温验证结果播报，以及口罩佩戴提示播报。 各项主要参数指标 产品关键参数 点击下载产品手册 相关产品

产品详情 全部 通信 终端和服务器 Telecommunication Fiber optic cable termination box Sheet Metal Fiber optic terminal box is the final connector of a fiber optic cable, one end of which is the fiber optic cable and the other end is the pigtail, which is equivalent to the equipment that splits a fiber optic cable into a single fiber, its function is to provide fiber to fiber fusion, fiber to pigtail fusion and optical connector handover. It also provides mechanical protection and environmental protection for optical fiber and its components, and allows proper inspection to maintain the highest standard of fiber management, which can be further divided into wall-mounted fiber optic terminal box, rack-mounted fiber optic terminal box, indoor and outdoor fiber optic terminal box two types. Product Benefits Wall-mounted optical cable terminal box (1) Wall-mounted fiber optic terminal box is used for fiber optic cable introduction, fixed and protection, fiber optic cable terminal and pigtail fusion fiber fusion distribution unit body, the maximum limit of fiber optic cable into the end, contiguous and wiring a high degree of tightening, play the role of pigtail tray storage and protection connector, and can be used as a separate fusion distribution unit and hung on the wall as necessary. (2) The box body is made of high-quality cold-rolled steel plate or galvanized steel plate, and the surface of the box body adopts electrostatic spraying process, which has superior dustproof, anti-corrosion and anti-aging performance and high safety performance; (3) Boxes can be accessed up and down the cable, easy to install and operate; (4) The fusion box is a laminated structure, which can be easily increased or decreased, easy to operate and can be adapted to the fusion of ribbon fiber; (5) The adapter is installed at an inclined angle, and the coiling of the pigtail is naturally smooth and has a large radius of curvature, which minimizes the transmission loss of the fiber; (6) Sufficient impact strength box fixing for easy installation in different use cases (7) Compact and lightweight, with a mechanically designed structure that is reliable in any operation, replacement, storage and transport situation; (8) Suitable for indoor fiber optic cable through splicing and branch splicing, to protect the role of fiber optic splices; (9) Providing space for placement of fiber optic cable terminals and storage of fiber at the remaining ends, facilitating installation operations; (10) Insulate the metal components of the fiber optic cable from the fiber optic cable end shell and allow easy lead-in grounding; (11) You can choose direct pigtail out, or choose a variety of adapters such as SC, FC, LC, ST, etc. Rack mount optical cable terminal box (1) Optical fiber terminal box, referred to as OTB, is the terminal in the laying of fiber optic cable to protect the cable and pigtail fusion box, mainly used for indoor fiber optic cable through splicing and branch splicing and cable terminal fixed, play the role of pigtail tray storage and protection connector. Rack type cable terminal box is installed in the 19-inch cabinet, to meet the 19-inch cabinet installation. (2) Common rack mount terminal box: (3) The box body is made of high-quality cold-rolled steel plate or galvanized steel plate, and the surface of the box body adopts electrostatic spraying process, which has superior dustproof, anti-corrosion and anti-aging performance and high safety performance; (4) Compact and light weight, mechanical design structure is reliable in any operation, replacement, storage and transportation, etc., with internal fiber optic cable fixing device, fusion splice tray, and over wire ring; (5) Sufficient impact strength box fixing for easy installation in different use cases (6) Providing space for placement of fiber optic cable terminals and storage of fiber at the remaining ends, facilitating installation operations; (7) With the function of insulating the metal structure of the fiber optic cable from the terminal box shell and can be easily led out to ground; (8) You can choose direct pigtail out, or choose a variety of adapters such as SC, FC, LC, ST, etc. Pull-out terminal box (1) The box body is made of high-quality cold-rolled steel or galvanized steel, and the surface of the box body adopts electrostatic spraying technology, with beautiful appearance and convenient operation; (2) Suitable for indoor fiber optic cable through splicing and branch splicing, to protect the role of fiber optic splices; (3) A variety of adapters such as SC, FC and LC can be used according to construction needs. Product Type According to the application scenario, it can be divided into wall-mounted optical cable termination box and rack-mounted optical cable termination box. Wall-mounted terminal box Rack-mounted terminal box Pull-out terminal box Product use It is used for wiring connection of fiber optic cable and optical communication equipment. Through the adapter in the terminal box, the optical signal is led out by optical patch cable to realize the optical wiring function. It is suitable for the protective connection of fiber optic cable and wiring pigtail, and also for the fiber optic terminal point in fiber optic access network, and is widely used in integrated cabinet and network cabinet. Product application tools Fiber optic terminal box construction, the need to use to the tools are: fusion fiber machine, alcohol, power meter, anhydrous ethanol, OTDR tester, pigtail, dissecting pliers, fiber cutting knife, oblique pliers, horizontal ruler, impact drill, screwdriver, black tape, soft plastic tape, ring knife, tin pliers, optical power meter, pen red light source, etc. Frequently Asked Questions How is the fiber optic cable termination box connected? (1) outdoor fiber optic access terminal box, the purpose is to fuse the fiber in the fiber optic cable with the pigtail, through the jumper, to lead it out. (2) the fiber optic patch fiber into the fiber optic transceiver, the fiber optic cable signal into electrical signals. (3) the fiber optic transceiver is the electrical signal, the use of transmission media is twisted-pair cable, twisted-pair cable can be accessed at this time network equipment RJ-45 port, so far, it will complete the conversion of the photoelectric signal. Can it be customized? Yes, whether you are a standardized derivative, or non-standard customization, we can meet. 点击下载产品手册 相关产品 1/2 Traditional fiber optic cable transfer box Sheet Metal 1/1 All-in-one fusion tray Sheet Metal 1/2 No-jump fiber optic cable transfer box Sheet Metal 1/2 Expanded capacity fiber optic cable transfer box Sheet Metal

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJSO3-M1AX-144C-SRZJ14(GP1444) The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environments need to be specified separately in the order. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、 tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、 vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-24~144C-SRZJ14-W20(GP1405) Box material: PP Adapt to the diameter of fiber optic cable: elliptical hole: 10-25mm Small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core:) 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 Fiber optic cable termination box Fiber optic terminal box is the final connector of a fiber optic cable, one end of which is the fiber optic cable and the other end is the pigtail, which is equivalent to the equipment that splits a fiber optic cable into a single fiber, its function is to provide fiber to fiber fusion, fiber to pigtail fusion and optical connector handover. It also provides mechanical protection and environmental protection for optical fiber and its components, and allows proper inspection to maintain the highest standard of fiber management, which can be further divided into wall-mounted fiber optic terminal box, rack-mounted fiber optic terminal box, indoor and outdoor fiber optic terminal box two types. Product Benefits Wall-mounted optical cable terminal box (1) Wall-mounted fiber optic terminal box is used for fiber optic cable introduction, fixed and protection, fiber optic cable terminal and pigtail fusion fiber fusion distribution unit body, the maximum limit of fiber optic cable into the end, contiguous and wiring a high degree of tightening, play the role of pigtail tray storage and protection connector, and can be used as a separate fusion distribution unit and hung on the wall as necessary. (2) The box body is made of high-quality cold-rolled steel plate or galvanized steel plate, and the surface of the box body adopts electrostatic spraying process, which has superior dustproof, anti-corrosion and anti-aging performance and high safety performance; (3) Boxes can be accessed up and down the cable, easy to install and operate; (4) The fusion box is a laminated structure, which can be easily increased or decreased, easy to operate and can be adapted to the fusion of ribbon fiber; (5) The adapter is installed at an inclined angle, and the coiling of the pigtail is naturally smooth and has a large radius of curvature, which minimizes the transmission loss of the fiber; (6) Sufficient impact strength box fixing for easy installation in different use cases (7) Compact and lightweight, with a mechanically designed structure that is reliable in any operation, replacement, storage and transport situation; (8) Suitable for indoor fiber optic cable through splicing and branch splicing, to protect the role of fiber optic splices; (9) Providing space for placement of fiber optic cable terminals and storage of fiber at the remaining ends, facilitating installation operations; (10) Insulate the metal components of the fiber optic cable from the fiber optic cable end shell and allow easy lead-in grounding; (11) You can choose direct pigtail out, or choose a variety of adapters such as SC, FC, LC, ST, etc. Rack mount optical cable terminal box (1) Optical fiber terminal box, referred to as OTB, is the terminal in the laying of fiber optic cable to protect the cable and pigtail fusion box, mainly used for indoor fiber optic cable through splicing and branch splicing and cable terminal fixed, play the role of pigtail tray storage and protection connector. Rack type cable terminal box is installed in the 19-inch cabinet, to meet the 19-inch cabinet installation. (2) Common rack mount terminal box: (3) The box body is made of high-quality cold-rolled steel plate or galvanized steel plate, and the surface of the box body adopts electrostatic spraying process, which has superior dustproof, anti-corrosion and anti-aging performance and high safety performance; (4) Compact and light weight, mechanical design structure is reliable in any operation, replacement, storage and transportation, etc., with internal fiber optic cable fixing device, fusion splice tray, and over wire ring; (5) Sufficient impact strength box fixing for easy installation in different use cases (6) Providing space for placement of fiber optic cable terminals and storage of fiber at the remaining ends, facilitating installation operations; (7) With the function of insulating the metal structure of the fiber optic cable from the terminal box shell and can be easily led out to ground; (8) You can choose direct pigtail out, or choose a variety of adapters such as SC, FC, LC, ST, etc. Pull-out terminal box (1) The box body is made of high-quality cold-rolled steel or galvanized steel, and the surface of the box body adopts electrostatic spraying technology, with beautiful appearance and convenient operation; (2) Suitable for indoor fiber optic cable through splicing and branch splicing, to protect the role of fiber optic splices; (3) A variety of adapters such as SC, FC and LC can be used according to construction needs. Product Type According to the application scenario, it can be divided into wall-mounted optical cable termination box and rack-mounted optical cable termination box. Wall-mounted terminal box Rack-mounted terminal box Pull-out terminal box Product use It is used for wiring connection of fiber optic cable and optical communication equipment. Through the adapter in the terminal box, the optical signal is led out by optical patch cable to realize the optical wiring function. It is suitable for the protective connection of fiber optic cable and wiring pigtail, and also for the fiber optic terminal point in fiber optic access network, and is widely used in integrated cabinet and network cabinet. Product application tools Fiber optic terminal box construction, the need to use to the tools are: fusion fiber machine, alcohol, power meter, anhydrous ethanol, OTDR tester, pigtail, dissecting pliers, fiber cutting knife, oblique pliers, horizontal ruler, impact drill, screwdriver, black tape, soft plastic tape, ring knife, tin pliers, optical power meter, pen red light source, etc. Frequently Asked Questions How is the fiber optic cable termination box connected? (1) outdoor fiber optic access terminal box, the purpose is to fuse the fiber in the fiber optic cable with the pigtail, through the jumper, to lead it out. (2) the fiber optic patch fiber into the fiber optic transceiver, the fiber optic cable signal into electrical signals. (3) the fiber optic transceiver is the electrical signal, the use of transmission media is twisted-pair cable, twisted-pair cable can be accessed at this time network equipment RJ-45 port, so far, it will complete the conversion of the photoelectric signal. Can it be customized? Yes, whether you are a standardized derivative, or non-standard customization, we can meet. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H41 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through connection and divergence and other trunk optical cable and common optical cable network connection. The use of double-ended horizontal screw-free box sealing design structure, the product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open; reasonable structure layout, construction operation is simple and fast. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for metropolitan area network backbone, urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、the box body box cover and optical cable mouth are silicon rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 60 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 60(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 37.5mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 M5AX-JX-AL-SC(48)-12~144C(GP304) The product is suitable for outdoor large-capacity fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and fast construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts the single end in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; open the box body without tools; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 6、with fiber into the end of the patch function; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M4AX-AL-12-672C(GP321) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 8-30mm Number of cable entry ports: 2+16 Maximum capacity of fusion fiber tray (core): 12 Maximum number of fusion cores (cores): 672 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and the number of - Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 ODF subframe ODF subframe is also called ODF unit frame, fusion and distribution integration frame, unit box, unit body, which has optical cable fixing and protection function, optical cable termination function, cable transfer function, and optical cable core and pigtail protection function. It can be installed as fiber optic distribution frame alone, or installed in a cabinet/rack with digital wiring unit and audio wiring unit to form a comprehensive wiring frame. The equipment configuration is flexible, easy to install and apply, easy to maintain, easy to manage, is the fiber optic communication cable network terminal, or relay point to achieve the row of fiber, fiber jumping, cable fusion and access equipment. Product Benefits (1) Modularity: The components are all modularized, which can be flexibly matched with modules to achieve different functional combinations, making the components of different models universal and interchangeable; (2) Systematization: We have products with different capacities to meet the requirements of various indoor and outdoor environments, and are equipped with a full range of high-quality optical component products, and can provide system solutions; (3) Humanization: emphasizing humanized operation, management, etc., full positive operation, deep understanding of engineering construction, and always insisting on excellence in the handling of details; (4) Standardization: Strictly follow the various standards related to the industry and actively participate in the revision of various technical specifications of the industry; (5) Professionalism: professional technicians and production and testing equipment guarantee superior performance and reliability of products. Product Type Product use fiber optic cable fixed, fiber optic cable protection, fiber optic cable termination, cable transfer function, fiber core and pigtail protection function ODF subframe has optical cable fixing and protection function, optical cable termination function, cable transfer function, and optical cable core and pigtail protection function. Product application tools Fusing machine, optical fiber cutting knife, OTDR tester, pen red light source, dissecting pliers, power meter, anhydrous ethanol,, optical fiber cutting knife, diagonal pliers, horizontal ruler, impact drill, screwdriver, tin pliers, optical power meter. Frequently Asked Questions How to choose the product adapter type-FC or SC? Choose according to the type of adapters used with other matching equipment in the cabinet or rack. How to choose the number of cores of the subframe? According to the number of cores of fiber optic cable introduced and the number of fiber cores required in the rack and cabinet. How can I tell if a rack is using ribbon or bundled fiber? According to the fiber optic cable used to choose, ribbon fiber optic cable then choose ribbon pigtail, bundle fiber optic cable choose bundle pigtail. How do I choose the color of the subframe? The color of the subframe needs to be uniform and beautiful with the color of the installed cabinet or rack. 上一个产品 下一个产品

产品详情 全部 通信 终端和服务器 Terminal and Server 8 million intelligent outdoor gun camera MJ-AB801 Spring Promotion Cameras ​ Key selling points (1) Up to 8MP resolution (3840x2160) (2) Using the latest H.265 encoding compression technology (3) Support cell phone APP remote monitoring and control (4) Built-in AI algorithm (5) Support area intrusion when linking alarm audio (6) Support wireless network wifi6 access (7) Support full color, intelligent, infrared three night vision mode Each main parameter index Product key parameters 点击下载产品手册 相关产品 1/1 4 million intelligent indoor dome camera QH-ESF401-PI Spring Promotion Cameras

产品详情 全部 通信 终端和服务器 通信 ODF子框 钣金 ODF子框又称ODF单元框、熔配一体化机框、单元盒、单元体，它具有光缆固定和保护功能、光缆终接功能、调线功能、以及光缆纤芯和尾纤保护功能。即可单独配装成光纤配线架，也可与数字配线单元、音频配线单元同装在一个机柜/机架内，构成综合配线架。该设备配置灵活、安装适用简单、容易维护、便于管理，是光纤通信光缆网络终端，或中继点实现排纤、跳纤、光缆熔接及接入的设备。 产品优点 (1) 模块化：部件均采用模块化设计，可以通过模块的灵活搭配来实现不同的功能组合，使不同型号产品的组件具有通用性和互换性； (2) 系统化：拥有满足室内、室外各种环境要求的、不同容量的产品，并配有全系列高品质的光器件产品，并能提供系统的解决方案； (3) 人性化：强调人性化操作、管理等，全正面化操作，对工程施工有深厚的理解，对细节的处理一直坚持精益求精； (4) 标准化：严格遵循行业相关各种标准，并且积极参与行业的各种技术规范的修订； (5) 专业化：专业技术人员和生产、检测设备保障产品性能优越性和可靠性 。 产品类型 产品用途 光缆固定、光缆保护、光缆终接、调线功能、光缆纤芯和尾纤保护功能 ODF子框具有光缆固定和保护功能、光缆终接功能、调线功能、以及光缆纤芯和尾纤保护功能。 产品应用工具 熔纤机、光缆切割刀、OTDR测试仪、笔式红光源、剖线钳、功率计、无水乙醇、、光纤切割刀、斜口钳、水平尺、冲击钻、螺丝刀、铁皮钳、光功率计 常见问题解答 产品适配器种类怎么选择-FC还是SC？ 根据机柜、机架里其他配套使用的设备所配适配器的种类来选择。 子框的芯数怎么选择？ 根据引入光缆的芯数和机架、机柜内所需光纤芯数定。 怎么判断机架使用带状纤还是束状纤？ 根据使用的光缆来选择，带状光缆则选择带状尾纤，束状光缆选择束状尾纤。 机架的颜色怎么选择？ 机架的颜色根据机房里面其他设备的颜色做到统一、美观。 点击下载产品手册 相关产品 1/24 绝缘耐压固定装置（金具） 钣金 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 综合机柜 钣金 主图1.jpg 主图2.jpg 主图6.jpg 主图1.jpg 1/17 光缆终端盒 钣金 主图1.jpg 主图2.jpg 主图1.jpg 1/2 移动智慧厕所 钣金